In order for the drivers to be enabled during installation, press the F6 key.
#M4a78 em wont save bios settings windows
More often, this happens with the installation of Windows XP/2000.
if you do not do this, then the “ASUS motherboard not detecting SATA hard drive” will continue to appear in the future. When installing the OS, sometimes motherboard drivers are not installed immediately to do this, you need to perform several actions. If this doesn’t work, you should not be upset, since there are still enough options for correcting them. The next time you boot, the drive will definitely be detected. In Disk Management, just turn on the desired hard drive and save all the changes. Often, when you boot your computer, you just need to press the F2 key and the Settings menu will appear on your screen. The order in which you enter the BIOS depends on which laptop manufacturer you have. This can be checked in the BIOS menu if necessary, turn on the disk. You can also connect your hard drive to another laptop or computer as an external hard drive and thereby check whether it will be detected or not. Please note that for safety reasons, the SATA cable should be shorter than 100 cm long (Seagate recommendation). If there is no problem with this either, then it is best to get a new cable (or an old one that still works) and check if the error disappears. If this is the case, pay attention to the connectors themselves: they should also be in good condition. Visually check the cable to make sure there are no bends, scuffs, protruding wires, etc. So, a correct connection and a working cable is the key to success.Ĭheck that the cable and drive are properly connected.
0 kommentar(er)
